Pro 1000+ heating furnace with a built-in fan is designed for heating large rooms with an area of up to 400 m² and a volume of up to 1000 m³.
The power of this furnace model is 40 kW, which allows you to quickly heat up large spaces, including production shops, warehouses, or even large houses.
Effectiveness ratio — 91%
The burning time on one full load of firewood is up to 12 hours
The diameter of the flue pipe is 160 mm
The hearth of the furnace is made of a thick-walled pipe, 9 mm thick. The casing is made of metal, 1.5 mm thick. This is enough for the efficient operation of the stove for more than one season and does not prevent good heat transfer into the room.
One of the key features of the furnace is the afterburning system of secondary gases, which significantly increases the efficiency of fuel use. The afterburning chamber of secondary gases is arranged in such a way that it mixes oxygen from the air with flue gases, and under the influence of an open flame, they ignite, releasing additional heat. This increases the efficiency of the furnace up to 91% and increases the economy of the furnace.
The stove works in two modes: burning and smoldering. The burning mode is used to ignite the furnace and quickly heat up the room, and the smoldering mode maintains the set temperature after heating, significantly saving fuel. Switching between modes and adjusting the burning intensityis carried out with the help of two gate valves on the door and chimney nozzles.
Inside the furnace there is a plate that helps to cool the gases before exiting the chimney, which increases the service life of the pipe and the stove in general. The oven door is equipped with a heat-resistant cord that prevents smoke from escaping into the room.
This stove model is equipped with a fan that ensures fast and uniform heat distribution and allows you to reach a comfortable temperature in the room in a short time.
The 59 W thrust axial type fan has a productivity of 619 m³/h, which allows you to evenly heat a room with a volume of up to 500 m³ per hour.
The use of a fan allows you to increase the efficiency of the furnace up to 91% and evenly distribute the heated air over the entire area of the room.
Each series and model of our furnaces is developed by a designer that ensures maximum efficiency and productivity. We have serial production of furnaces, which guarantees the quality of each product. Also, all oven models have a certificate of conformity.
We are confident in the quality of our products and that you will be satisfied.
As a confirmation for us and for you, these are the reviews of our customers.
Below is only a small part of them.
In our heating stoves, an active thermal circuit is used for efficient heat distribution and maintaining the optimal temperature in the room, as well as for increasing the energy efficiency of the stove. Such a circuit is a combination of corrugated pipes, as well as connecting a fan for blowing around the firebox or along the contour of the furnace walls. Thanks to the active thermal circuit, the stove can maintain stable heating even after the end of burning, cooling down more slowly and releasing the accumulated heat. This allows you to reduce fuel consumption and ensure constant comfort in the room.
Звʼяжіться з нами і ми допоможемо підібрати найкращий варіант для Вас
