Principle of work and design

ECOZHAR

How the furnace works

The DS stove is designed to heat rooms up to 50 m2 and 130 m3 in volume. The door has a heat-resistant glass that allows you to observe the combustion process on cold winter evenings. A ceramic cord glued around the perimeter of the door ensures that the stove is hermetically sealed. The blower nozzle is located under the firebox, and the regulator is located on the front wall, under the door. The spacious firebox, with dimensions of 650x420 mm and a metal thickness of 6 mm, allows you to work up to 7 hours without refueling.

The firebox door and heat-resistant glass

The handle of the firebox door acts as a lock in the closed position. In this position, the door is tightly pressed, and due to the sealing cord along the contour of the door itself, flue gases cannot enter the room. Heat-resistant glass is built into the door, which allows you to observe the combustion process on cold winter evenings.

Firewood box

The DS Classic stove has a firewood box for convenient storage of firewood. Its sophisticated design allows for neat stacking of firewood, keeping the stove tidy and providing easy access to it. The open structure of the firewood box on the one hand allows air to circulate around the firewood, helping it to stay dry and ready for use.

A blower valve

A blower valve is installed under the firebox door, and the regulator is located on the front wall, under the door. It allows you to precisely dose the amount of air entering the combustion chamber, thereby optimizing efficiency and increasing the time of fuel combustion on one full load. This damper allows you to precisely adjust the cross-section of the inlet pipe, which allows you to use the stove in two operating modes: combustion mode and smoldering mode.

Cooking surface

The upper surface of the stove can heat up to 300-400 degrees, which allows you not only to heat the room, but also to reheat or cook food.

Firebox thickness

In the DS series furnaces, special emphasis is placed on the thickness of the firebox metal, which is 6 mm. The metal we use guarantees a service life of at least 10 years.

Outer casing

The casing is made of 2 mm thick sheet metal. This thickness was chosen for a reason. First, it is the optimal thickness that allows the structure to be rigid. Secondly, in this area, the metal is less susceptible to temperature effects than the metal of the furnace. Thirdly, if the casing wall is too thick, it will prevent good heat transfer to the room, which will reduce the efficiency of the stove as a whole. There are several color options for the casing: red, silver, gold and copper. You can choose your favorite, or choose the option without a casing.

Chimney flue

The chimney flue is available with a diameter of 160 mm. It has a regulator for controlling the smoke exit into the chimney. Comfortable carbolite handles are resistant to high temperatures and have a stylish look.

Watch a 1.5-minute video about the DS series furnaces

DS Classic heating stove with cooking surface + casing gold

Discover comfort and warmth! The stylish and functional DS stove is designed to heat rooms up to 80m 2 and 240m3 in volume.

The power of this stove model is 8 kW, which allows you to quickly warm up large spaces, including production halls, warehouses or even large houses.

The efficiency is 81%.

Burning time on one full load of wood - up to 6 hours

Chimney diameter - 160 mm

Конструкція печі DS Classic

Топка печі виготовлена з товстостінної труби, товщиною 6 мм. Кожух зроблений з металу, товщиною 1.5 – 2 мм. Цього достатньо для ефективної роботи печі не один сезон та не перешкоджає хорошій віддачі тепла у приміщення.

Піч працює у двох режимах: горіння та тління. Режим горіння використовується для розпалювання печі та швидкого прогрівання приміщення, а режим тління підтримує задану температуру після нагрівання, значно економлячи паливо. Перехід між режимами та регулювання інтенсивності горіння здійснюється за допомогою двох шиберних заслінок на дверному та димохідному патрубках.

Всередині топки є пластина, яка сприяє охолодженню газів перед виходом у димохід, що збільшує термін служби труби та пічки загалом. Дверцята печі обладнані термостійким шнуром, що запобігає виходу диму в приміщення.

Each series and model of our furnaces is developed by a designer to ensure maximum efficiency and productivity. We have mass production of furnaces, which guarantees the quality of each product. And all models of stoves have a certificate of conformity.

We are confident in the quality of our products and that you will be satisfied.

Our customers' feedback serves as confirmation for both us and you.

Below is only a small part of them.

The thickness of the furnace

6mm

Heating volume

240m3

Heating area

80m2

Firebox size

650х420mm

Warranty