Principle of work and design

ECOZHAR

How the stove works

Discover comfort and warmth! The DS Modern stove is designed to heat rooms up to 80m2 and 240m3 in volume. A ceramic cord glued around the perimeter of the door ensures that the stove is hermetically sealed. The spacious firebox, with dimensions of 650x420 mm and a metal thickness of 6 mm, allows you to work up to 7 hours without refueling.

The firebox door and heat-resistant glass

The handle of the firebox door acts as a lock in the closed position. In this position, the door is tightly pressed, and due to the sealing cord along the contour of the door itself, flue gases cannot enter the room. Heat-resistant glass is built into the door, which allows you to observe the combustion process on cold winter evenings.

A blower

A blower valve is installed under the firebox door, and the regulator is located on the front wall, under the door. It allows you to precisely dose the amount of air entering the combustion chamber, thereby optimizing efficiency and increasing the time of fuel combustion on one full load. This damper allows you to precisely adjust the cross-section of the inlet pipe, which allows you to use the stove in two operating modes: combustion mode and smoldering mode.

Firebox thickness

In the DS series furnaces, special emphasis is placed on the thickness of the firebox metal, which is 6 mm. The metal we use guarantees a service life of at least 10 years.

Coolant circulation chamber

Inside the furnace there is a plate that helps to cool the gases before they enter the chimney, which increases the service life of the pipe and the furnace as a whole.

Chimney flue

The chimney flue is available with a diameter of 160 mm. It has a regulator to control the smoke exit into the chimney. Comfortable carbolite handles are resistant to high temperatures and have a stylish look.

Watch a 1.5-minute video about the DS series furnaces

Wood heating stove DS Modern + red cover

Discover comfort and warmth! The DS Modern stove is designed to heat rooms up to 80m 2 and 240m3 in volume.

The efficiency is 81%.

Burning time on one full load of wood - up to 6 hours

Chimney diameter - 160 mm

Construction of the DS Modern stove

The furnace furnace is made of a thick-walled pipe, 6 mm thick. The casing is made of metal, 1.5 - 2 mm thick. This is enough for the stove to operate efficiently for more than one season and does not interfere with good heat transfer to the room.

The stove operates in two modes: burning and smoldering. The burning mode is used to ignite the stove and quickly warm up the room, and the smoldering mode maintains the set temperature after heating, significantly saving fuel. Switching between the modes and adjusting the intensity of combustion is carried out using two slide dampers on the door and chimney pipes.

There is a plate inside the firebox that helps to cool the gases before they enter the chimney, which increases the service life of the chimney and the stove as a whole. The stove door is equipped with a heat-resistant cord that prevents smoke from escaping into the room.

Each series and model of our furnaces is developed by a designer to ensure maximum efficiency and productivity. We have mass production of furnaces, which guarantees the quality of each product. And all models of stoves have a certificate of conformity.

We are confident in the quality of our products and that you will be satisfied.

Our customers' feedback serves as confirmation for both us and you.

Below is only a small part of them.

The thickness of the furnace

6 mm

Type of furnace

airborne

Heating volume

240 cubic meters

Heating area

80 sq.m.

Material