The power of this furnace model is 20 kW, which allows you to quickly warm up large spaces, including production halls, warehouses, or even large houses.
The efficiency is 91%.
Burning time on one full load of wood - up to 8 hours
.png)
The furnace is made of a thick-walled pipe, 8 mm thick. The casing is made of metal, 1.5 mm thick. This is enough for the stove to operate efficiently for more than one season and does not prevent good heat transfer to the room.
One of the key features of the furnace is the secondary gas afterburner system, which significantly increases fuel efficiency. The secondary gas afterburner chamber is designed in such a way that oxygen from the air is mixed with the flue gases, and under the influence of an open fire, they ignite, generating additional heat. This increases the efficiency of the furnace up to 91% and improves the furnace's economy.
The stove operates in two modes: combustion and smoldering. The combustion mode is used to ignite the stove and quickly warm up the room, and the smoldering mode maintains the set temperature after heating, significantly saving fuel. Switching between the modes and adjusting the intensity of combustion is carried out using two slide dampers on the door and chimney pipes.
There is a plate inside the firebox that helps to cool the gases before they enter the chimney, which increases the service life of the chimney and the stove as a whole. The stove door is equipped with a heat-resistant cord that prevents smoke from escaping into the room.
This model is equipped with a fan that ensures fast and even heat distribution and allows you to achieve a comfortable room temperature in a short time.
The 59 W axial type blower fan has a capacity of 619 m³/h, which allows for even heating of a room with a volume of up to 500 m³ per hour.
The use of the fan allows to increase the efficiency of the furnace up to 91% and evenly distribute the heated air throughout the room.
Each series and model of our furnaces is developed by a designer to ensure maximum efficiency and productivity. We have mass production of furnaces, which guarantees the quality of each product. And all models of stoves have a certificate of conformity.
We are confident in the quality of our products and that you will be satisfied.
Our customers' feedback serves as confirmation for both us and you.
Below is only a small part of them.
Our heating stoves use an active heat circuit to distribute heat efficiently and maintain the optimum room temperature, as well as to increase the energy efficiency of the stove. This circuit is a combination of corrugated tubes and a fan connection for blowing around the firebox or along the contour of the stove walls. Thanks to the active heat circuit, the stove can maintain stable heating even after combustion is complete, cooling down more slowly and releasing the accumulated heat. This reduces fuel consumption and ensures constant comfort in the room.
Звʼяжіться з нами і ми допоможемо підібрати найкращий варіант для Вас
